The new model is particularly impressive in three areas:

1.) The main focus is on reliability in order to ensure continuous operation - even under the most difficult conditions - on long days in the field.

2.) Thanks to the short and compact design of the power harrow and coulter rail, the centre of gravity of the machine is very close to the tractor's rear axle.

3.) The front hopper has been redesigned with a full-length cover for optimum filling and now has a capacity of 2,400 litres in the large tank version.

The front hopper with maximum flexibility in the field

The newly developed front hopper makes it possible to convey an even higher flow rate of seed to the coulter rail. The front hopper is available with a capacity of either 1,700 litres or 2,400 litres and is now fitted with a full-length, airtight cover. During development, special emphasis was placed on handling and accessibility while filling and calibrating. A service platform with two steps provides better visibility into the hopper during filling. When selecting the front hopper, there is a choice of standard single metering unit or the dual metering system.

Single shoot metering makes it possible to place not only seed but also fertiliser, companion crop, micro-granules or another type of seed in the seed slot in a single step. This ensures maximum flexibility. The requirements of modern agriculture can be met in full by the new AEROSEM front hopper seed drill.

The cost effective seed drill

The coulter rail on the AEROSEM FDD is mounted on the power harrow using a docking system and only takes a few minutes to fit or remove. What is unique about this new system is that in just a few steps the coulter rail and distributor head unit can be removed from the power harrow extremely quickly. This saves time and allows the power harrow to be used on its own immediately.

Proven coulter rail

The compact, folding coulter rail with a short headstock puts the centre of gravity impressively close to the tractor. The distributor head is mounted on the coulter rail and features a patented system that ensures it is always kept in vertical position. The patented linkage system ensures the distributor head is vertical to deliver perfect lateral distribution. The proven DUALDISC double disc coulters are offset at 30 cm and ensure precision seed placement. Convenient operation, especially regarding the coulter rail, makes the whole system very user-friendly. The coulter pressure can be adjusted mechanically (hydraulic adjustment is available as an option) from a central point and seed placement depth is set conveniently from the side of the machine.

Seed distribution is controlled using the distributor head, which can be provided with individually controllable outlets (IDS) as an option. Using the fully-equipped version, the driver can easily adjust the tramline widths and tyre widths directly at the control terminal to set up a perfect tramline system.

The new AEROSEM 6002 FDD delivers pure performance, the highest level of convenience as well as precision and flexibility, engineered especially to meet every arable farming professional's requirements.

New: LION 1002 C, folding power harrows

A new dimension in power up to 500 hp

The new LION 1002 C series power harrow with a working width of 6.0 metres sees Pöttinger expand its range of folding power harrows. Designed for tractors up to 500 hp, these models are equipped for the toughest jobs, day in and day out. The new LION is available from November 2021.

During the development of the new power harrow, special attention has been paid to current and future requirements in terms of durability and strength. A strongly dimensioned tine carrier and a high-capacity central gearbox ensure that high driveline torques are transmitted efficiently. Combined with folding coulter rails, this machine is an extremely effective and flexible implement.

Compact design

The integration of the folding frame has made the machine more compact and optimised weight distribution. The result is an extremely short and compact power harrow that is up to 30 cm shorter than any of its competitors. The centre of gravity is now closer to the rear axle and the weight acting on the front axle is noticeably more positive. The 1002 C folds to an outer width of 3.0 metres so that transport on the road is no problem.

The solution for the toughest conditions

The new power harrow is the answer to today's standard tractor power outputs of up to 500 hp. A newly developed PTO with 2-speed gearbox enables a wide speed range. The 1002 C series is designed for PTO speeds between 750 and 1300 rpm. This ensures that the tractor always runs within its optimum performance range. Reliability is enhanced as a result. A high-capacity gearbox housing provides the necessary cooling.

The rotor speeds vary between 320 and 420 rpm. This ensures perfect working results while reducing fuel consumption. Thanks to its strongly dimensioned external gearbox, the power harrow is approved for tractor outputs of up to 500 hp. A cam-type clutch on each frame section protects the machine against overload up to 2,200 Nm.

Easy machine adjustment

No tools are required to adjust the machine. This is done from the side of the machine - an intuitive indicator scale acts as a guide. All you need to do is pull out a lynch pin and adjust the control rod to set the working depth as required. This system allows the working depth to be adjusted at intervals of approx. 1 cm. Fully hydraulic working depth adjustment is also available as an option. Thanks to the parallel linkage, the levelling board is adjusted automatically when the working depth is changed.

Convenient levelling board linkage

An impressive and much appreciated advantage is offered by the levelling board, which is automatically height adjusted by the rear roller. This is completely independent of working depth setting. The levelling board is guided at a consistent pre-defined distance above the soil without changing its distance from the tines or its pre-set height. This patented solution delivers the most level and uniform tilth structure for the seedbed, even in varying soil conditions.

Choice of rollers for every type of soil

Seedbed preparation is concluded by one of a wide range of rear rollers. Two tooth packer rollers and two prism packer rollers as well as one pack ring roller are available. On the tooth packer rollers and prism packer rollers there are two different diameters to chose from.

Combined with a Pöttinger AEROSEM FDD seed drill, this machine becomes a high output and cost effective combination delivering perfect sowing results. Featuring easy attachment to the tractor, this is the perfect solution for farmers with high specifications, for today and into the future.