NEW TERRADISC DISC INJECTOR
The Terradisc is available with a working width from 4 to 6m. It includes 32 to 48 discs with a diameter of 510mm which are bolted to the chassis on two rows.
The first one will open the ground. Slurry then goes through the injection pipes which are located between the discs of the first row in order to be laid down in these openings. The second row of discs, which is positioned in the opposite direction, cover up the slurry and flattens the ground.
The discs are mounted individually on an axis with a plastic bearing, which allows them to avoid obstacles since they will move a little upwards. The Terradisc is fully galvanized.
The advantages of this system are a fast en efficient injection of slurry up to 18cm deep (adjustable per stage) as well as an outstanding stubble ploughing quality. Furthermore, it is possible to work at high speed with almost no loss of nutrients. Finally, the compactness of this machine provides it with a favourable center of gravity.
The Terradisc is available on the JOSKIN Quadra, X-Trem, Volumetra, Euroliner and Vacu-Cargo slurry tankers.
SIDE JUMBO PUMPING ARM
JOSKIN indeed meets many customers´ wishes by proposing to mount the JUMBO pumping arm on the side.
This arm provides a high pumping power thanks to, among other things, the 8" pipe.
It can be mounted on the left- or right-hand of the tanker. Thanks to its easy and strong construction, the JUMBO arm provides a high suction power at low cost.
Lowering and raising the arm can be done through a double-acting cylinder which is controlled from the tractor.
In transport position, the arm is held by a safety hook, just like all other JUMBO arms. It is possible to unlock the hook mechanically with a cord from the tractor cabin.
The new side pumping arm is available on Volumetra, Delta2, Modulo2 and Tetrax tankers.
THE JOSKIN GROUP IN 2014 – EXTENSIONS, PROJECTS AND GOALS
These 20,000m² are divided as such:
1. 3,650m² of production hall including:
A. cutting area, where the automatic saws have been transfered to and 2 impressive lasers for cutting tubes and steel sections;
B. a full automatic storing hall for steel sections and tubes;
C. an unloading area for steel sections and tubes;
D. a robotized welding area, to extend the existing one;
E. a training workshop, which is a schooling area for technical schools who would like to train their students in a real technical surrounding.
2. A 4,950m² Production Hall including:
A. an area to change the final equipment of series produced stock machines, in order to fit the additional equipment which the final customer has choosen;
B. a workshop for producing and assembling dedicated hydraulic, electrical, or pneumatic kits according to the chassis number of the vehicle which will need these;
C. an assembly area for dorsal filling arms and line spreading booms, the fitting of these on the tankers, and the final personalized testing with water of these tankers.
3. Storing hall of 8,000m² :
A. the storage of pasture aerators, grass toppers and water bowsers, with final fittings according to the customer´s choices;
B. storing and preparing the equipment used at indoor and outdoor shows/fairs;
C. a stock of finished JOSKIN vehicles, which can be visited by customers to visualize the numerous JOSKIN solutions.
4. A 3,150m² Warehouse for large size parts including:
A. An impressive full automatic storage facility with 900 trays for parts up to maximum 4,50 m;
B. shelves for a manual storage of over-sized parts;
C. a packing and dispatching area, where parcels with big parts are joined by the smaller parts for groupage delivery and expedition with external parcel delivery companies through 2 mobile loading decks which adapt themselves to the size of the vehicle to be loaded.
